|
|
|
|
How do I replace the control board on my Mini or Helix system?
|
|
| |
Control Board Replacement on the Mini and Helix Systems Machine Types: Epilog Mini 18/24, Helix Tools needed: #1 & #2 Phillips head screwdrivers Note: If you are printing through the Ethernet port it is important that you retrieve the parameter for the IP Address, Subnet Mask and Gateway fro...
|
|
|
How do you replace the Mini controller board? |
|
| |
How do you replace the Mini controller board? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Mini-Controller-Board-Replacement.pdf...
|
|
|
How do I replace the Zing control and display unit?
|
|
| |
How do I replace the Zing control and display unit? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Control-Board-replacement.pdf...
|
|
|
How do I replace the Helix controller board? |
|
| |
How do I replace the Helix controller board? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/replace-controller-board-helix.pdf...
|