|
|
|
|
How do I level my engraving table on the Mini or Helix?
|
|
| |
Checking and Adjusting Your Laser System's Table Level Machine types: Mini, Helix Procedure: Checking table level Tools required: Manual Focus Gauge A perfectly level table is key to any cutting or engraving project. Here we'll show you how to check your table level and adjust as necessary. With y...
|
|
|
How do I check the levelness of the table on my Mini or Helix laser? |
|
| |
Checking Table Level on the Mini and Helix Laser Machine Type: Mini 18 and 24, and Helix Laser Tools required: Manual Focus Gauge With your machine on, open up the main door so you can have full access to the table. Locate manual focus gauge. This is triangular or “V” shaped tool. Place the ga...
|
|
|
How do I check and adjust the Helix table level?
|
|
| |
How do I check and adjust the Helix table level? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Checking-table-level-Adjustment.pdf...
|
|
|
How do I check and adjust the Zing table level? |
|
| |
How do I check and adjust the Zing table level? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Checking-Table-Level-Adjustment.pdf...
|
|
|
How do I level the table in my Fusion Pro 48?
|
|
| |
The instructions below detail how to level the table in the Fusion Pro 48.Table level should be checked periodically to ensure that all areas of the table are the same distance from the focusing lens. If all areas of the table are not the same distance from the focusing lens, loss of laser power an...
|