|
|
|
|
How do I replace the lens on the Fusion?
|
|
| |
How do I replace the lens on the Fusion? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Fusion-lens-replacement.pdf...
|
|
|
How does the focus lens work on the laser? |
|
| |
This Technical Library article discusses the purpose of the focus lens as well as guidelines for using lenses of different sizes for various projects. What does a focus lens do? A laser beam emanating from the laser tube is typically around one-quarter of an inch (240 thousandths) in diameter. Th...
|
|
|
How do I clean the lenses in my laser system?
|
|
| |
Cleaning the Optics in your Epilog Laser System Ensuring your optics are clean will help your laser system perform its best. If smoke, resin, or other contaminants are allowed to accumulate too heavily, they will reduce the available laser power and may cause damage. Dirty optics can also greatly r...
|
|
|
How do I remove my lens carriage on the Epilog Zing? |
|
| |
Lens Carriage Removal and Installation on the Epilog Zing Laser Machine Type: Zing Engraver Tools Required: Phillips screw driver Disconnect the machine from its power source. Remove the power cord from the machine. Move the X-Axis assembly to the center of the machine. Move the...
|
|
|
Where can I buy the Epilog lens cleaner?
|
|
| |
Lens Cleaner - How to Purchase More You can purchase it directly from Epilog Technical Support. Dial +1 303.215.9171, press #1 for parts. The part number for the lens cleaner is MCP-303....
|
|
|
How do I replace the lens assembly on the 36EXT? |
|
| |
Replacing the Epilog Legend 36EXT Lens Assembly Although the standard 2" focal lens that comes with the EXT will work well for most projects, to achieve the optimum laser beam on special types of projects, we offer two optional focus lenses. The optional lenses on the Legend 36EXT are designed not ...
|
|
|
How do I replace the lens carriage roller on my Epilog Zing?
|
|
| |
Zing Engraver Lens Carriage Roller Replacement Machine Type: Epilog Zing Laser Tools Required: Phillips screwdriver Disconnect the machine from its power source. Remove the power cord from the machine. Move the X-Axis assembly to the center of the machine. Move the lens carriage to the center o...
|
|
|
How do I remove and reinstall the Zing lens carriage? |
|
| |
How do I remove and reinstall the Zing lens carriage? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Lens-carrriage-removal-installation.pdf...
|
|
|
How do I replace the Zing lens carriage roller?
|
|
| |
How do I replace the Zing lens carriage roller? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Lens-Carriage-Roller-Replacement.pdf...
|