> Knowledge base> Article: What are the Power Supply Specifications for Primera Products?

What are the Power Supply Specifications for Primera Products?

Article ID: 45090 Print
Question
What are the Power Supply Specifications for Primera Products?

Answer

For Bravo, Bravo II, Bravo SE, Bravo SE-3, Optivault, Bravo XR, LX400, LX500, LX810, LX900, LX2000, ADL MAX, AP360/AP362, AP550 and Signature Z6.

Input: 100-240 Vac
Output: 12Vdc, 5.0A, 60W(max)
Polarity: positive = inner / negative = outer (same as image below)
Barrel Outer Diameter = 5mm


See image below for more details.

For Composer, Composer Plus, Composer XL, Inscripta, and Composer Pro

Input: 100-240V
Output: 24V 2.5A
Polarity: positive = inner / negative = outer (same as image above)

For Signature III, IV, Pro

Input 120-127Vac
Output 30Vdc 830MA
Polarity: positive = inner / negative = outer (same as image above)

For Signature Z1

Input: 100-240V
Output: 24V 1.25A
Polarity: positive = inner / negative = outer (same as image above)

For BravoPro, Bravo XRP, BravoProXi Series and Bravo4100 Series and ComposerMAX

These products have a 300W internal power supply with an external switch to switch between 100-120V and 240V systems. A standard grounded three prong female power connector commonly used for computers and monitors can be used to connect to a surge protected power strip.

For Accent, Accent II and DUP-07

These products have an internal power supply that is factory set to either 100-120V or 240V systems. A standard grounded three prong female power connector commonly used for computers and monitors can be used to connect to a surge protected power strip.


related articles

Article Details
Views: 8495 Created on: May 25, 2014
Date updated: Aug 10, 2016

Poor
Outstanding