My Composer XL/Pro is not picking discs correctly. (Calibration Instructions)
Your Composer probably needs calibration. It is possible to calibrate the Composer arm by pressing the buttons on the front in a particular sequence.
Calibrating the Input bin location:
Calibrating Pick Depth:
Calibrating the Signature Output bin location:
First follow steps 1 – 3b of Input bin Calibration. If calibration is needed follow these steps:
Calibrating the Inscripta Output bin location:
First follow steps 1 – 4b of Input bin Calibration. If calibration is needed, follow these steps:
Calibrating the Right Recorder Drive:
Calibrating the Left Recorder Drive:
Calibrating the Signature:
Fine Tune Adjustments for aligning the Printer and Composer:
Pick and place a few CDs into the printer tray, making sure that they all drop centered into the tray. If any of the CDs are not being placed exactly centered or are hanging up on the raised edge of the tray, then realignment must be performed. Centering of the CD into the tray is crucial to the proper loading and printing of your CDs. If things are close but not perfect you may encounter some miss picks or misplacements causing the printer to fail during printing of the CD.