Epilog Knowledge Base - Support Center
Imagine. Design. Create.
Support Center > Knowledge base> Tagged: motor
Tag: motor
12 Articles
Orange arrow How do I replace the X-motor on my Legend 36EXT?

16890 views
  Replacing the X-Motor on the Legend 36EXT Machines: Legend 36EXT Tools: 5/32 Allen Wrench Remove both side panels. Push the I-beam until it is perpendicular to the opening on the left side of the machine, so it is more accessible. Disconnect the three leads connected to the motor. Loosen the ...
Posted in: Legend 36EXT

Orange arrow How do I replace the x-axis motor on my Epilog Mini?

21178 views
  X-Axis Motor Replacement on the Epilog Mini Machine Types: Epilog Mini 18/24 Tools Needed: #2 Phillips Head Screwdriver Turn off and unplug the laser engraver. You will need to remove the left and right sides of the engraver. To do this, you will need to remove the 6 Phillips head screws on each ...
Posted in: Epilog Mini
Tagged: x-axis, motor, mini


Orange arrow How do I replace the X-motor on the FiberMark?

3456 views
  How do I replace the X-motor on the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Replacing-xmotor-FiberMark.pdf...
Orange arrow How do I replace the Y-motor on the FiberMark?

2830 views
  How do I replace the Y-motor on the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/replacing-y-motor-Fibermark.pdf...
Orange arrow How do I replace the Z-motor on the FiberMark?

3018 views
  How do I replace the Z-motor on the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/replacing-z-motor-Fibermark.pdf...
Orange arrow How do I replace the Fusion Z-motor?

3174 views
  How do I replace the Fusion Z-motor? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Replacing-Fusion-Z-motor.pdf...
Orange arrow How do I replace the Fusion rotary motor?

3072 views
  How do I replace the Fusion rotary motor? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Rotary-motor-Fusion.pdf...
Orange arrow How do I replace the Fusion X-axis motor?

3239 views
  How do I replace the Fusion X-axis motor? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/X-Motor-replacement.pdf...
Orange arrow How do I replace the Mini/Helix X-axis motor?

4069 views
  How do I replace the Mini/Helix X-axis motor? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Mini-Helix-X-Motor-Replacement.pdf...
Orange arrow How do I replace the Zing table motor?

2654 views
  How do I replace the Zing table motor? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Table-Motor-Replacement.pdf...
Orange arrow How do I replace the x-axis motor in my Fusion Edge?

1632 views
  The instructions below show how to replace the x-axis motor in the following models: Fusion Edge 12,24 & 36, Fusion Pro 24 & 36. 17 - X-Axis Motor Replacement.pdf If further assistance is needed, please reach out to Epilog Tech Support by phone at 303-215-9171, or email at tech@epil...
Orange arrow How do I replace the x-axis motor in my Fusion Pro 32 or Fusion Pro 48?

857 views
  The instructions below detail the replacement of the x-axis motor in the Fusion Pro 32 and Fusion Pro 48. 16000 - X-Axis Motor Replacement If further assistance is needed, please reach out to Epilog Laser Tech Support by phone at 303-215-9171, or by email at tech@epiloglaser.com....

Page: 1 of 1