This page is to provide you with special settings that we've developed with CADLink for PhotoLaser Plus, as well as to provide you with some quick tips that we think you'll find helpful when using the software.
PhotoLaser Plus Photo Processing Settings
Unzip the material profile settings into your C:\PhotoLaser Plus Epilog Edition 9.0\PhotoLaser. They include our 600 dpi wood setting, a setting for small photos engraved on wood, acrylic with invert and flip included, anodized aluminum, engravable plastic, leather, a marble/stone setting that automatically inverts the photo.
PLP_Instructions.pdf
A short pdf document demonstrating how to use PhotoLaser Plus, and software tips.
| Material |
Res. |
PhotoLaser Plus Material Setting |
30 watt |
40 watt |
50 watt |
60 watt |
75 watt |
120 watt
|
| Marble |
300 dpi |
marble_invert.plp |
100s
70p |
100s
60p |
100s
50p |
100s
40p |
100s
30p |
100s
15p |
| Wood (Maple) |
600 dpi |
Wood Setting 600 DPI Epilog.plp |
30s
100p |
40s
100p |
50s
100p |
60s
100p |
70s
100p |
100s
100p |
| Wood - Small Photo |
600 dpi |
Wood Setting 600 DPI Small Image.plp |
35s
100p |
45s
100p |
55s
100p |
65s
100p
|
75s
100p |
100s
100p |
| Black Anodized 300 DPI |
300 dpi |
Black Anodized Invert 300 DPI Epilog |
100s
35p |
100s
30p |
100s
25p |
100s
20p
|
100s
15p |
100s
10p |
| Black Anodized 600 DPI |
600 dpi |
Black Anodized Invert 600 DPI Epilog |
100s
30p |
100s
25p |
100s
20p |
100s
15p |
100s
10p |
100s
5p |
| Acrylic |
300 dpi |
acrylic_invert_flip.plp |
100s
60p |
100s
55p |
100s
50p |
100s
45p |
100s
40p |
100s
30p |
Frequently Asked Questions:
Q: Is this a replacement for CorelDRAW or other graphic layout software?
A: No, this is photo processing software that should be used for photos. Use Corel or another software package for more complicated graphic layouts after the photo is processed through this software.
Q: Why isn't my photo engraved into wood coming out as well as Epilog's?
A: Are you using the wood setting developed by Epilog? We use this for 100% of our wood photography and it provides exceptional results when engraving into wood. Download the settings above!
Q: I'm using Epilog's wood setting, but I'm seeing an obvious dot pattern when I engrave the photo.
A: You aren't running a photo resized to 600 dpi. Before processing the photo with the Epilog Wood Setting, go to Image/Image Size and change the photo size to 600 dpi, then hit apply.