How do I adjust the drives on my Composer Max for front-to-back drive picking problems?
The drives in the Composer Max come factory calibrated to the correct front to back positions. Typically you would not need to manually adjust drive positions. Make sure to first try the calibration procedures using the buttons on the front of the Composer Max. However, occasionally drives can come loose and slip back or forward in the drive housing. If this happens use the procedure listed below:
Upper drives are locked into position by the front pairs of screws on the top of the drive cage cover. Lower drives are locked into position by the rear pair of screws on the top of the drive cage cover. They are the screws in the recessed holes of the printer plate.
Such that:The Left front pair of screws = left upper driveThe Left rear pair of screws = left lower driveThe Right front pair of screws = right upper driveThe Right rear pair of screws = right lower drive