|
|
|
|
How do I install the Mini/Helix super silent fans?
|
|
| |
How do I install the Mini/Helix super silent fans? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Super-Silent-fan-install.pdf...
|
|
|
How do I replace the Mini X-axis motor? |
|
| |
How do I replace the Mini X-axis motor? Click links below for instructions: Mini X Motor Replacement With Fan Upgrade: https://www.epiloglaser.com/assets/downloads/tech-support/Mini-X-Motor-Replacement-With-Fan-Upgrade.pdf Mini X Motor Replacement Without Fan Upgrade: https://www.epiloglase...
|
|
|
How do I replace the fans in the Helix/Mini?
|
|
| |
How do I replace the fans in the Helix/Mini? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/fan-replacement-Helix.pdf...
|
|
|
How do I upgrade the Mini/Helix fan assembly? |
|
| |
How do I upgrade the Mini/Helix fan assembly? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Mini-Helix-X-Motor-Fan-Upgrade.pdf...
|
|
|
How do I install the Super-Silent Fans in my Mini or Helix?
|
|
| |
Super-Silent Fans Installation Instructions for the Epilog Mini and Helix Machine Types: Epilog Mini 18/24 and Helix Tools Needed: #1 Phillips Head Screwdriver 5/16 nut driver Turn off and unplug the engraver from the power source. Facing the rear of the machine, remove the eight Phillips screw...
|
|
|
How do I replace the fans on my Epilog Mini or Helix System? |
|
| |
Fan Replacement on the Epilog Mini and Helix Systems Machine Type: Epilog Mini 18/24 and Helix Tools Needed: #2 Phillips head screwdriver, 6/32 Nut driver Flat head screwdriver or wire cutter Turn engraver off and unplug it from the wall. Face the back of the machine where the exhaust is ...
|