|
|
|
|
How do I set the X/Y home position on my Epilog Mini or Helix?
|
|
| |
Setting the X-Y Home Position on the Mini/Helix Machine Type: Epilog Mini 18/24, Helix Tools Needed: Ruler or Measuring Calipers Turn on the engraver. Open a new page in Corel Draw. Create a 1 inch black filled box. Place it 1 inch from the top of the page and 1 inch from the left ed...
|
|
|
How do I set the X-Y home position on the FiberMark? |
|
| |
How do I set the X-Y home position on the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Setting-XY-Home-Fibermark.pdf...
|
|
|
How do I calibrate the Fusion M2/32/40 focus?
|
|
| |
How do I calibrate the Fusion M2/32/40 focus? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Fusion-XYZ-calibration.pdf...
|
|
|
How do you set the Mini X Y home? |
|
| |
How do you set the Mini X-Y home? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Setting-XY-Home-Mini.pdf...
|