Epilog Knowledge Base - Support Center
Imagine. Design. Create.
Support Center > Knowledge base> Tagged: auto focus
Search
Tag: auto focus
9 Articles
Orange arrow How do I troubleshoot a problem with my auto focus assembly on my laser?

23507 views
  Checking the Auto Focus Plunger Assembly This guide will walk you through troubleshooting common problems when dealing with the Auto Focus feature. The Auto Focus Plunger is a tool the machine uses to focus the laser automatically. Below are troubleshooting and maintenance guidelines that will help...
Posted in: Troubleshooting
Tagged: auto focus
Orange arrow How do I replace the Auto Focus Plunger on my Mini or Helix?

34060 views
  Auto Focus Plunger Replacement on the Mini/Helix Machine Type: Epilog Mini 18/24, Helix Tools Needed: Small screw driver 5/64 Allen wrench Intro: This procedure details steps to replacing the auto focus plunger on the Legend Mini and Helix machines. Before starting on this procedure, ...
Orange arrow How do I keep the laser head from moving out from home position when I hit the Focus button?

9594 views
  Click here to see a video of how to use the Stop/Focus feature to keep the laser head from moving....
Tagged: auto focus
Orange arrow How do I set manual and auto focus on my Epilog Mini or Helix?

29037 views
  Setting Manual Focus & Auto Focus Machine Types: Epilog Mini 18/24 and Helix Tools Needed: #1 Phillips Head Screwdriver Piece of Anodize Aluminum Get out a 4x4 piece of anodized aluminum and place it inside the machine, flushed with the ruler guide. Now turn on the engraver. ...
Orange arrow How do I adjust the Fusion table level?

5746 views
  How do I adjust the Fusion table level? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Table-Level-Fusion.pdf...
Orange arrow How do I replace the Mini/Helix auto focus plunger?

4393 views
  How do I replace the Mini/Helix auto focus plunger? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/replacing-auto-focus-plunger-helix-mini.pdf...
Orange arrow How do I set the Mini/Helix manual and auto focus?

5942 views
  How do I set the Mini/Helix manual and auto focus? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Setting-Manual-Auto-Focus-Helix.pdf...
Orange arrow How do I replace the auto focus switch in my Fusion Edge?

1620 views
  The instructions below show how to replace the auto focus sensor in the following models: Fusion Edge 12, 24 & 36, Fusion Pro 24 & 36. 17 - AF Sensor Replacement.pdf If further assistance is required, please contact Epilog Tech Support by phone at 303-215-9171, or by email at tech@e...
Orange arrow How do I calibrate the Fusion M2/32/40 focus?

6979 views
  How do I calibrate the Fusion M2/32/40 focus? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Fusion-XYZ-calibration.pdf...

Page: 1 of 1
©2024 Epilog Laser   |   powered by LiveHelpNow Help Desk Software
 Total articles: 275 | Total views: 6112356