|
|
|
How do I realign the ruler guides on my Mini or Helix?
|
|
|
Squaring the Ruler Guides on the Mini/Helix Machine Types: Epilog Mini 18/24, Helix If your rulers have been moved accidentally or on purpose and you would like to return them to their original positioning, and by following these simple steps it will walk you through the process. Turn Power “O...
|
|
How do I align the laser beam of my Epilog Mini or Helix? |
|
|
Aligning the Laser Beam of the Epilog Mini and Helix Machine Type: Mini 18 and 24 and Helix Laser Tools Required: # 1 Phillips Screw Driver 3/32 Hex (Allen) Wrench Target (supplied with machine) 1 piece of Masking Tape I need a new Target Order one by calling 303-215-9171, pressing #1 and r...
|
|
How do I align the laser beam on my Epilog Zing laser?
|
|
|
...
|
|
Where can I buy or print out a new target for aligning my laser beam? |
|
|
Purchase or Print a New Laser Alignment Target If you need a new target for aligning your laser beam you can order one by calling 303-215-9171. Press #1 and request: TT198: Target for the Epilog Zing, Mini, Helix, and older style Legend 36EXT (with 4" exhaust ports). MM098: Target for the Fibe...
|
|
How do I optically align the FiberMark?
|
|
|
How do I optically align the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/FiberMark-Optical-Alignment.pdf...
|
|
How do I align the laser for the Fusion CO2? |
|
|
How do I align the laser for the Fusion CO2? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Fusion-Alignment.pdf...
|
|
How do I align the laser for the Fusion FiberMark?
|
|
|
How do I align the laser for the Fusion FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Fusion-Fibermark-Alignment.pdf...
|
|
How do I correct an out of square arm assembly for the Fusion? |
|
|
How do I correct an out of square arm assembly for the Fusion? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Correct-out-of-square-arm-assembly-Fusion.pdf...
|
|
How do I align the Mini/Helix MT laser?
|
|
|
How do I align the Mini/Helix MT laser? (For Mini/Helix manufactured from 2004-2009) Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Mini-Helix_MT_Align_Laser.pdf...
|
|
How do I align the Mini/Helix MX laser? |
|
|
How do I align the Mini/Helix MX laser? (For Mini/Helix manufactured from 2010 to current) Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Mini-Helix_MX_Align_Laser.pdf...
|
|
How do I align the CO2 laser in my Zing 16?
|
|
|
The instructions below show how to align the CO2 laser in the Zing 16. https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Laser-Alignment.pdf If further assistance is needed, please reach out to Epilog Tech Support by phone at 303-215-9171, or email at tech@epiloglaser.com....
|
|
How do I align the laser in my 36EXT? |
|
|
The instruction below show the process of aligning the 36EXT. Aligning Laser 36EXT.pdf If you require further assistance, please reach out to Epilog Tech Support by phone at 303-215-9171, or by email at tech@epiloglaser.com....
|
|
How do I align the CO2 laser in my Fusion Edge?
|
|
|
The instructions below show how to align the CO2 laser in the following models: Fusion Edge 12, 24 & 36, Fusion Pro 24 & 36. Note: this procedure is for CO2 models only and is not intended for use on fiber and/or dual source models. 17000 - Fusion Edge CO2 Alignment.pdf If furth...
|