|
|
|
|
My engraving is drifting across the page and looks wavy. What is happening?
|
|
| |
Cleaning the X-Axis Linear Encoder Strip Machines: Epilog Mini 18/24, Helix, 36EXT Laser, and FiberMark. If you are seeing wavy engraving, or the engraving seems to be drifting across the page, you probably have a dirty linear encoder. Cleaning it is a quick process that we will explain below. Bef...
|
|
|
How do I level my engraving table on the Mini or Helix? |
|
| |
Checking and Adjusting Your Laser System's Table Level Machine types: Mini, Helix Procedure: Checking table level Tools required: Manual Focus Gauge A perfectly level table is key to any cutting or engraving project. Here we'll show you how to check your table level and adjust as necessary. With y...
|
|
|
My Air Assist is not operating correctly. How do I fix it?
|
|
| |
Troubleshooting the Air Assist Feature Machine Types: Mini 18, Mini 24, Helix, and EXT This guide will walk you through troubleshooting the most common problems that keep the Air Assist feature from working properly. Below are some common scenarios that prevent proper functioning. First, determine ...
|
|
|
I'm having problems printing over my crossover cable. What is the problem? |
|
| |
Troubleshooting a Direct Network Connection via Crossover Cable If you find yourself unable to print when connected to the host computer via crossover cable, please check the following items for a possible resolution. Delete all jobs from queue. Confirm the Epilog Laser being used is "online." Co...
|
|
|
How do I check the levelness of the table on my Mini or Helix laser?
|
|
| |
Checking Table Level on the Mini and Helix Laser Machine Type: Mini 18 and 24, and Helix Laser Tools required: Manual Focus Gauge With your machine on, open up the main door so you can have full access to the table. Locate manual focus gauge. This is triangular or “V” shaped tool. Place the ga...
|
|
|
The carriage rollers in my Zing look like they are different sizes. Is something wrong? |
|
| |
Symptom: Carriage rollers are visually different in size, which may cause engraving quality issues. If the carriage rollers are left for too long, you may experience metal on metal contact once the rollers wear. Issue: Zing engravers may contain carriage rollers that have been incorrectly sized....
|