|
|
|
How do I convert my vector artwork from CMYK to RGB using CorelDRAW?
|
|
|
Start by selecting all of your artwork with the Pick Tool (CTRL + A). Next open the Replace Objects Wizard, by selecting Edit / Find & Replace / Replace Objects from the drop-down menu option. Select Replace a color model or palette from the options, and click Next. Next, select the Find a c...
|
|
My engraving is drifting across the page and looks wavy. What is happening? |
|
|
Cleaning the X-Axis Linear Encoder Strip Machines: Epilog Mini 18/24, Helix, 36EXT Laser, and FiberMark. If you are seeing wavy engraving, or the engraving seems to be drifting across the page, you probably have a dirty linear encoder. Cleaning it is a quick process that we will explain below. Bef...
|
|
How do I level my engraving table on the Mini or Helix?
|
|
|
Checking and Adjusting Your Laser System's Table Level Machine types: Mini, Helix Procedure: Checking table level Tools required: Manual Focus Gauge A perfectly level table is key to any cutting or engraving project. Here we'll show you how to check your table level and adjust as necessary. With y...
|
|
My Air Assist is not operating correctly. How do I fix it? |
|
|
Troubleshooting the Air Assist Feature Machine Types: Mini 18, Mini 24, Helix, and EXT This guide will walk you through troubleshooting the most common problems that keep the Air Assist feature from working properly. Below are some common scenarios that prevent proper functioning. First, determine ...
|
|
I'm having problems printing over my crossover cable. What is the problem?
|
|
|
Troubleshooting a Direct Network Connection via Crossover Cable If you find yourself unable to print when connected to the host computer via crossover cable, please check the following items for a possible resolution. Delete all jobs from queue. Confirm the Epilog Laser being used is "online." Co...
|
|
How do I check the levelness of the table on my Mini or Helix laser? |
|
|
Checking Table Level on the Mini and Helix Laser Machine Type: Mini 18 and 24, and Helix Laser Tools required: Manual Focus Gauge With your machine on, open up the main door so you can have full access to the table. Locate manual focus gauge. This is triangular or “V” shaped tool. Place the ga...
|
|
Troubleshooting the Zing Engraver
|
|
|
Troubleshooting the Zing Engraver Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Zing-Troubleshooting.pdf...
|
|
How do I replace the X-motor on the FiberMark? |
|
|
How do I replace the X-motor on the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Replacing-xmotor-FiberMark.pdf...
|
|
What do the Diagnostic Lights on the Fusion refer to?
|
|
|
LED Diagnostic Light References: https://www.epiloglaser.com/dist_site/tech/FusionDiagnosticLEDs.pdf...
|
|
How do I align the FiberMark Laser? |
|
|
How do I align the FiberMark Laser? Click here to download the instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Checking-the-optical-alignment-FiberMark.pdf...
|
|
How do I replace the FiberMark Controller Board?
|
|
|
How do I replace the Fibermark Controller Board?Click below to view instructions: https://www.epiloglaser.com/assets/downloads/tech-support/Replacing-Controller-Board.pdf...
|
|
How do I replace the x-axis belt on the FiberMark? |
|
|
How do I replace the x-axis belt on the FiberMark Laser Engraver?Click below to view instructions: https://www.epiloglaser.com/assets/downloads/tech-support/fiber-mark-x-belt.pdf...
|
|
How do I replace the interlocks on the FiberMark?
|
|
|
How do I replace the interlocks on the FiberMark? Click link below to view instructions: https://www.epiloglaser.com/assets/downloads/tech-support/replacing-Interlock-Mini-Helix-Fibermark.pdf...
|
|
How do I replace the optics in the FiberMark? |
|
|
How do I replace the optics in the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/FiberMark-Optic-Replacement.pdf...
|
|
How do I optically align the FiberMark?
|
|
|
How do I optically align the FiberMark? Click the link below for instructions: https://www.epiloglaser.com/assets/downloads/tech-support/FiberMark-Optical-Alignment.pdf...
|