|
|
|
|
How do I configure AHCI settings?
|
|
| |
The best way to enable AHCI is to go to BIOS and enable AHCI mode, and then install the operating system. Boot the system, Enter BIOS setup Change SATA settings from IDE to AHCI. Install the operating system. When Windows is installed without enabling the AHCI mode in BIOS setup, an error may o...
|
|
|
Will TRIM still operate properly if my SSD is part of a RAID configuration? |
|
| |
In general, most modern RAID controllers do not support the TRIM command yet. There are, however, some limited controllers or PC chipsets that support RAID. Please check with the manufacturer of your particular RAID controller to determine if TRIM is supported....
|
|
|
Can Samsung NVMe™ M.2 SSDs be RAIDed?
|
|
| |
Yes. Samsung NVMe™ M.2 SSDs can be grouped into a RAID formation. Please ensure that your mainboard has a sufficient number of NVMe™ M.2 slots and that sufficient PCIe lanes are available for maximal performance....
|
|
|
What is the best RAID configuration? |
|
| |
There is no "best" RAID configuration. Consumers who choose to set up a RAID configuration should choose the option best-suited to their particular usage scenario. Each RAID configuration has specific advantages and disadvantages. Those looking for the highest possible performance may configure ...
|