> Knowledge base> Category: Bravo SE - SE-3
Search
Share
Category: Bravo SE - SE-3
148 Articles
Orange arrow How do I disable/enable Interactive Services Dialog Detection messages in Vista / 7 / 8 / 10 ?

13504 views
  How do I disable/enable Interactive Services Dialog Detection messages in Windows Vista/7/8/10? To disable/enable Interactive Services Dialog Detection messages in Windows Vista/7/8/10, click on the Start icon and search the word “services”. Click on Services when it comes up, and fi...
Orange arrow Unable to change the inner diameter or outer margin of the printed disc. (PTPublisher Mac)

7438 views
  Unable to change the inner diameter or outer margin of the printed disc. (PTPublisher Mac) 1. Make sure the image you are printing does not already have the inner diameter or outer margin built into the image. Some designers add the cropped inner circle and outer margin into the design using thei...
Orange arrow The arm and cartridges slam into the sides or move in fast jerking motions back and forth. (Bravo/BravoPro/Signature)

7074 views
  The arm and cartridges slam into the sides or move in fast jerking motions back and forth. The encoder belt may have slipped out of its track in the back of the head carriage unit or may have become unseated from the posts on either side of the unit. The printhead carriage has a sensor behind it...
Orange arrow What is the size capacity of my DVD, Dual Layer DVD or Blu-ray disc?

22413 views
  DVD and Blu-ray manufacturers state capacity in decimal form. However, most computers read capacity in binary. The following table translates stated decimal capacity into actual binary capacity. Single layer capacity Dual/Double layer capacity Stated Capacity (GB) PTPublisher Capa...
Orange arrow I receive the error when printing from PTPublisher 'No compatible devices found, would you like to print on plain paper?' (PTPublisher)

7242 views
  I receive the error when printing from PTPublisher 'No compatible devices found, would you like to print on plain paper?' (PTPublisher) There are three possible reasons this error occurs: 1. More than one version of SureThing is installed on the computer. Check to make sure only one version o...
Orange arrow How do I prepare my unit for shipping to Primera for repair or exchange?

13551 views
  How do I prepare my unit for shipping to Primera for repair or exchange? The instructions below should be followed for each product before boxing. It is best to use the original box and foam/cardboard supports. If you do not have the box, package the product in a box large enough to leave space ...
Orange arrow What rights or permissions are required for Primera Printers? Can I print from a user (non-admin) account?

14925 views
  To print from a user (non-admin) account, grant the rights below. For any Primera printer follow these steps. 1. Printer Rights. After installing the Printer driver, the administrator must open the Printers Folder, right-click on Primera Printer and click Properties. Click on the Se...
Orange arrow How do I send my product in for repair? How much is it? Where do I send it?

33762 views
  Please contact technical support via phone, email or chat before sending your product in for repair. If they determine that the product needs repair, they will send you a Return Material Authorization (RMA) document which includes the RMA number, packing instructions and the shipping address of our...
Orange arrow Unable to add printer driver in the Printer Setup Utility (Print Center) on MAC OS 10.x -or- Receive message "Driver not Installed" next to Disc Publisher.

10466 views
  Unable to add printer driver in the Printer Setup Utility (Print Center) on MAC OS 10.x -or- Receive message "Driver not Installed" next to Disc Publisher. 1. Reboot. First, Reboot the Mac. It is often necessary to reboot after installing driver files. Once the Mac is rebooted, try to add the prin...
Orange arrow The ink in the color cartridge is mixing or the first few passes of printing are lighter than the rest. (Cleaning the Maintenance Station)

10850 views
  The ink in the color cartridge is mixing or the first few passes of printing are lighter than the rest. (Cleaning the Maintenance Station) Cleaning the maintenance station prevents the color ink cartridge from mixing or the first few printing passes from being lighter than the rest of the label...
Orange arrow How to Disable Driver Signature Enforcement in Windows 8.

12108 views
  How to Disable Driver Signature Enforcement in Windows 8. From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon). Click ‘Change PC Settings’. Click ‘General’....
Orange arrow Why does lowering burn speed produce fewer errors and better quality discs?

7498 views
  Why does lowering burn speed produce fewer errors and better quality discs? Below is an example of an actual test performed to show the advantage of lowering the burn speed. Test 1 - A fifty disc burn at 52x with 700 MB of data produced 3 errors out of fifty. (Average Time per disc 3:18)* ...
Orange arrow My image is not printing centered on my discs

16716 views
  My image is not printing centered on my discs This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...
Orange arrow My cartridge is drying out, printing with missing colors or printing with poor quality. How do I clean my cartridge? (LX500, Bravo SE-3, Bravo 4200 Series)

25534 views
  A. Update Firmware. Update to the latest firmware version. You can update firmware within PTPublisher or the Status Monitor. B. Clean the Cartridge. If the cartridge has not been used for some time it is possible that the inkjet nozzles may dry out. Remove the cartridge from the printer an...
Orange arrow How do I completely remove and reinstall a Primera printer driver on Mac OSX 10.5 - 10.12

30065 views
  1. Unplug the USB cable from the back of your unit. 2. Go to Apple - System Preferences - Print & Fax. 3. Select your printer listed on the left pane of the window and click the minus (-) button. 4. Delete the files/folders from the following from the HD. To find this folder, Se...

Page: 1 of 10
©2024 Primera   |   powered by LiveHelpNow Help Desk Software
 Total articles: 640 | Total views: 4198288