For Bravo, Bravo II, Bravo SE, Bravo SE-3, Optivault, Bravo XR, LX400, LX500, LX810, LX900, LX2000, ADL MAX, AP360/AP362, AP550 and Signature Z6.
Input: 100-240 Vac
Output: 12Vdc, 5.0A, 60W(max)
Polarity: positive = inner / negative = outer (same as image below)
Barrel Outer Diameter = 5mm
See image below for more details.
For Composer, Composer Plus, Composer XL, Inscripta, and Composer Pro
Input: 100-240V
Output: 24V 2.5A
Polarity: positive = inner / negative = outer (same as image above)
For Signature III, IV, Pro
Input 120-127Vac
Output 30Vdc 830MA
Polarity: positive = inner / negative = outer (same as image above)
For Signature Z1
Input: 100-240V
Output: 24V 1.25A
Polarity: positive = inner / negative = outer (same as image above)
For BravoPro, Bravo XRP, BravoProXi Series and Bravo4100 Series and ComposerMAX
These products have a 300W internal power supply with an external switch to switch between 100-120V and 240V systems. A standard grounded three prong female power connector commonly used for computers and monitors can be used to connect to a surge protected power strip.
For Accent, Accent II and DUP-07
These products have an internal power supply that is factory set to either 100-120V or 240V systems. A standard grounded three prong female power connector commonly used for computers and monitors can be used to connect to a surge protected power strip.