The paper is walking to the front and back of the lower take-up mandrel. Sometimes it rides up on the lower take-up mandrel clear guide and wrinkles the paper and other times it goes too far forward. (FX1200)
Article ID: 44850

Question

The paper is walking to the front and back of the lower take-up mandrel. Sometimes it rides up on the lower take-up mandrel clear guide and wrinkles the paper and other times it goes too far forward. (FX1200)

Answer

The paper is walking to the front and back of the lower take-up mandrel.  Sometimes it rides up on the lower take-up mandrel clear guide and wrinkles the paper and other times it goes too far forward.  (FX1200)

 

1. Make sure guides 3 and 4 closest to the cutter are touching the web.  See page 36 of the manual for Guide Reference. 

 

2. Make sure guide 6 before the output nip roller is less than 1mm from the edge of the web on either side. 

 

3. Make sure there is no adhesive build-up or a stuck label on the either nip roller.  This will cause uneven tension and cause the web to walk. 

 

4. Make sure that you tape the web straight on the lower take-up core.

 

5. Make sure the distance behind the clear plastic guide and the cover plate is equal on both the supply mandrel, lower take-up mandrel and upper-take-up mandrel.

related articles

The CX1200 is not cutting the media/paper after the print is complete (CX1200).
The CX1200 prints only blank pages if when printing an all black label and eventually displays Paper Jam 250.66 (CX1200).
There are toner streaks in the printed output running in the direction of the paper feed. (CX1200)
CX1200 displays Paper Jam Error 200.28 in A,B,D - or 202.30 in D, K, L.
Paper is coming out of the printer too fast. There is not enough time to tape it to the core. (CX1200)
34 Short Paper Error displayed on the printer or half of the printed image is printed with only the yellow toner (CX1200-CX1000).
Error Message: Paper Jam 200.69, 200.72 or 200.75 (CX1200)
Paper Jam Error 250.15 - MP Feeder Door (CX1200)

Article Details

Views: 4584	Created on: May 24, 2014 Date updated: May 16, 2016
Posted in: CX1200-FX1200-CX1000-FX1000

Poor 1 2 3 4 5 Outstanding