Nothing happens on the FX1200 after I press Run Job (FX1200).
Article ID: 44647

Question

Nothing happens on the FX1200 after I press Run Job (FX1200).

Answer

 

Nothing happens on the FX1200 after I press Run Job (FX1200).

1. Moved Cut File. This is indication that the cut file has moved locations since the time when the cut file was first loaded into PTfinish.  This is typically caused by the removal of the USB thumb drive from the touch screen computer after the cut file was loaded into PTfinish.

2. Open Cover.  Close the cutter cover.

related articles

What are the FX1200 cut file specifications including target mark size and position?
Can I use my existing dies to cut labels printed on the CX1200?
Possible Error With License File -1 -or- Error Locating Security Device -or- Please replace security device (PTPrint Error)
What is the best image file format to use in PTPrint when importing graphics? (CX1200/CX1000)
The printed output is longer or stretched so that the size does not match the size of the file on screen. This can cause cuts to be offset. (CX1200)
How do I setup perforated cut lines for my FX1200?

Article Details

Views: 4760	Created on: May 24, 2014 Date updated: May 11, 2016
Posted in: CX1200-FX1200-CX1000-FX1000

Poor 1 2 3 4 5 Outstanding