|
|
|
|
How do I enable System (Kernel) Extensions on M1/M2/M3/M4 Macs for Samsung Magician?
|
|
| |
When installing a third-party program or extension, you may receive the "Systems Extensions Blocked/Updated" error on your Apple Silicon Mac. Then you follow the onscreen instructions to bypass the block for system extensions on your Mac, only to find that another error window pops up saying "To en...
|
|
|
Is it safe to play around with Mac's default security settings and enable system extensions? |
|
| |
If the Samsung software you are installing requires reduced security for installing kernel extensions, it is safe. That's because only identified and trusted developers by Apple can ask you to allow system extensions. Their software will never compromise the overall system security....
|
|
|
How do I perform Secure Erase?
|
|
| |
Before running Secure Erase, make sure that the firmware of the SSD is updated to the latest version. Also be aware that all data on the drive will be destroyed. - Windows : . Use Magician to run Secure Erase.Download Magician at http://www.samsung.com/samsungssd - DOS : . Use the Windows Magic...
|
|
|
I cannot run the Samsung Portable SSD Software. (Legacy) |
|
| |
The Samsung Portable SSD Software can only run on the following OS versions or newer: - Windows OS: Windows 7 or higher - Mac OS: Mac OS 10.10 or higher For more information, please contact the nearest Service Center, which can be found in the user manual and on Samsung.com minisite at (http://ww...
|
|
|
"No Samsung Portable SSD is connected." message appears even though the Samsung Portable SSD software is installed on the Apple Mac system.
|
|
| |
This symptom may occur when you install the Samsung Portable SSD software on the newly released (September, 2017) macOS High Sierra (10.13). This is due to the new Apple OS's policy that requires the user’s approval when the user installs a third-party software that is not directly distributed by ...
|
|
|
My Samsung Portable SSD software does not work properly on my MacPC with an Apple M1 chip. |
|
| |
This is due to a policy requiring user approval when installing third-party software that is not directly distributed by Apple on the newly released MacPCs (Apple M1 chip + macOS Big Sur). To solve the problem, follow the steps below: 1. On your system, navigate to Utilities > Startup Securi...
|
|
|
Can I use the T7 Touch with PCs not running the Windows OS or mac OS?
|
|
| |
It is recommended that you use the T7 Touch with PCs running Windows 7 or later, mac OS X 10.10 or later, or mobile devices running the Android OS 5.1 or later. You may be able to use the T7 Touch with an OS and device not specified above if you disable the Password Protection feature. However, you...
|