Epilog Knowledge Base - Support Center
Imagine. Design. Create.
Support Center > Knowledge base> Category: General Questions
Category: General Questions
29 Articles
Orange arrow How can I use an Epilog Laser on PCBs?

40443 views
  One of the most common questions we get at Epilog is "can your lasers do printed circuit boards?" The answer is multifaceted and, depending on the application, there are some ways to use lasers with PCBs. Here we'll take a look at the some PCB applications suited for a laser as well as those that a...
Orange arrow How do I create city map artwork for cutting or engraving with my Epilog Laser? (CorelDRAW)

28206 views
  Laser Engrave or Cut a City Map (CorelDRAW) Laser engraved or cut city maps are easy to create and will quickly become a great new addition to your popular laser engraved and cut products. Create your own local city maps and laser engrave them on cutting boards, marble tiles, and small tables, or ...
Orange arrow How do I create city map artwork for cutting or engraving with my Epilog Laser? (Adobe Illustrator)

75819 views
  Laser Engrave or Cut a City Map (Adobe Illustrator) Laser engraved or cut city maps are easy to create and will quickly become a great new addition to your popular laser engraved and cut products. Create your own local city maps and laser engrave them on cutting boards, marble tiles, and small tab...
Orange arrow What is the maximum table weight of my machine?

13755 views
  Static: Lifting: Epilog Fusion Maker 12/24/3690 lbs (40.8 kg)60 lbs (27.2 kg)Epilog Fusion Edge 12/24/3690 lbs (40.8 kg)60 lbs (27.2 kg)Epilog Fusion Pro 24/36With Vector Grid: 60 lbs (27.2 kg) With Task Plate: 90 lbs (40.8 kg)60 lbs (27.2 kg)Epilog Fusion Pro 32/48With Vector Grid: 85 lbs (38.6 k...
Orange arrow I'm wiring my business for the laser and am running 220V. What cord end will I be receiving with my machine?

27929 views
  Systems: All Epilog's laser systems use auto-switching power supplies accommodating 110 to 240 volts at 50-60Hz. We recommend a dedicated 15A breaker regardless of voltage. If you are going to be running your laser on a 220V and are located in the United States, you will receive a cord with a NEMA ...
Tagged: 220v, plug


Orange arrow How does the resolution I choose affect my engraving?

49041 views
  Higher laser resolution equates to finer detail in your engraving. With the exception of the Zing Starter Series, which goes up to 1000 DPI, the rest of Epilog's product line can engrave at resolutions up to 1200 DPI. Resolution is only one factor in determining image quality. The initial quality ...
Tagged: resolution


Orange arrow How does the focus lens work on the laser?

64525 views
  This Technical Library article discusses the purpose of the focus lens as well as guidelines for using lenses of different sizes for various projects. What does a focus lens do? A laser beam emanating from the laser tube is typically around one-quarter of an inch (240 thousandths) in diameter. Th...
Orange arrow How do I choose the correct wattage laser for my needs?

100990 views
  The power of the laser source is measured in watts. Depending on the machine you are considering you will have power options for your laser source that range from 30-120 watts for CO2 laser tubes. Generally speaking, lower power CO2 laser tubes will be able to process the same materials, with the s...
Orange arrow How can I color fill my project?

24145 views
  Using a Mask to Create a Color Fill For this exercise, we'll be demonstrating how to use a mask or application tape to create a color fill. Application tapes are great for protecting surfaces from smoke or debris that's created while the laser is engraving or cutting. The application tape for this ...
Tagged: mask, color fill


Orange arrow What is the difference between a YAG and CO2 laser?

55200 views
  Two of the most common types of lasers you hear about are YAG and CO2. While Epilog manufactures a CO2 laser system, we wanted to give you some information about the two different types of laser systems and which one may be right for your application. Both CO2 lasers and YAG lasers generate a very ...
Tagged: yag


Orange arrow How do I setup a project for the Vector Pin Table?

13026 views
  In this project, we're going to show you how to set up a file to be used with the Vector Pin Table, a popular accessory of the Epilog laser system. The Vector Pin Table is used to hold your project above the cutting table with the use of small pins. This allows the laser to cut through the material...
Tagged: pin table


Orange arrow How much power does an Epilog Laser system use, and how much does it ultimately cost to run one?

59282 views
  Power Consumption and Your Laser Using the formula and information below, you can discover how much power our laser systems draw as well as how much it costs to operate a laser. Most users are pleasantly surprised at how energy and cost efficient these powerful systems are - even our highest-watta...
Orange arrow How do I keep the laser head from moving out from home position when I hit the Focus button?

9593 views
  Click here to see a video of how to use the Stop/Focus feature to keep the laser head from moving....
Tagged: auto focus


Orange arrow Where can I buy the Epilog lens cleaner?

29716 views
  Lens Cleaner - How to Purchase More You can purchase it directly from Epilog Technical Support. Dial +1 303.215.9171, press #1 for parts. The part number for the lens cleaner is MCP-303....
Orange arrow Hi, we have an epilog laser and we're moving offices. Can you tell me how to properly pack or secure it for moving?

14090 views
  Moving the Laser System If you have the original foam and cardboard inserts available, reinsert them into the machine with the main concern being that the I-Beam (the main bar that contains the lens carriage) stays secure in its track. We recommend that you ziptie the I-Beam in place to be certain...
Tagged: moving



Page: 1 of 2