Machine types: Mini, HelixProcedure: Checking table levelTools required: Manual Focus Gauge
A perfectly level table is key to any cutting or engraving project. Here we'll show you how to check your table level and adjust as necessary.
If you find the table is not level and needs to be adjusted, please continue on with the “Leveling Table” procedure. It is likely that the table is higher or lower in one corner – begin leveling the table in the corner you find higher or lower than the rest.
Machine Type: Mini, Helix Tools required: 7/64 Allen wrench
If you have any questions, please contact Epilog’s Technical Support team.Phone: 303-215-9171 E-mail: tech@epiloglaser.com Fax: 303-277-9669