Can I apply labels to a tapered container (AP360-AP362)
Article ID: 98546

Question

Can I apply labels to a tapered container

Answer

It is possible to apply labels to tapered containers. 

• Adjust the Container Idler Roller per the instructions below.  There are pre-established notches that can be used to angle the container idler roller so that the container is level.  However, for best results, you should clamp the roller into the optimal position.
• Use custom labels that are shaped as a rounded trapezoid (Wider/Narrower at the top vs the bottom).  This will allow you to apply the label straight with no wrinkles or bubbles. 

Use these instructions to adjust the container idler roller.

related articles

Labels are skipping, applying inconsistently or -SC- is displayed. (AP550).
The platform does not move during application - and/or -The applicator skips several labels between applications. (AP550)
What are the container and media specifications for the AP360/362?
How can I apply a label starting at a specific point on the container? (AP362 ONLY!)
Labels are applied to the container crooked.
Labels are applied to the container crooked.
Label edges fold over or catch on the sensor as they are applied to the container.
What are the container and media specifications for the AP550?

Article Details

Views: 3454	Created on: Feb 07, 2019 Date updated: Feb 07, 2019
Posted in: AP360-AP362-AP550

Poor 1 2 3 4 5 Outstanding