> Knowledge base> Article: CX1200 Print Specificatons for Fixed Die Cutters.

CX1200 Print Specificatons for Fixed Die Cutters.

Article ID: 44946 Email Print
Question
CX1200 Print Specificatons for Fixed Die Cutters.

Answer

 

CX1200 Print Specificatons for Fixed Die Cutters.

Important Note:  Because of the .125" (3.17mm) gap between pages which is required by the printer, most existing flexible or hard tooled dies will not work with the printed output of the CX1200.  For this reason you will need to create new dies for output printed on this printer.  The one exception to this would be if your die cutter can reregister at least .125" (3.17mm).  Most hard tooled die cutters that do not lift the die off the web can not reregister more than 1mm. 

Note: None of the above specifications apply to XY plotter cutters.


related articles

Article Details
Views: 1807 Created on: May 25, 2014
Date updated: May 25, 2016

Poor Outstanding