> Knowledge base> Article: When pressing Run System Forward (arrow to the right) the media stops after moving only a small amou

When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

Article ID: 44842 Email Print
Question
When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

Answer

 

When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

1. Make sure the cover is closed on the cutter.

2. Make sure there are no errors on the Run tab.  For example an out of media error will produce this condition.

3. Check the following touch screen settings.  Go to Start - Configure Utility - Settings Tab. 

  • Make sure the large button at the bottom of the screen says "Normal Mode" - To change, press the button repeatedly to scroll through the options.
  • Press the Option button - Make sure the bottom two items are checked.  Most importantly, make sure "Auto Right Click" is unchecked.

 


related articles

Article Details
Views: 1522 Created on: May 24, 2014
Date updated: Jun 27, 2016

Poor Outstanding