> Knowledge base> Article: The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac)

The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac)

Article ID: 44708 Email Print
Question
The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac)

Answer

The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac)

Try the following suggestions to get the drive recognized.

1. Plugin Sequence. Try this sequence for getting the Mac to recognize the unit's burner drive:

  • Shutdown your Mac.
  • Unplug everything from the back of the unit.
  • Restart your Mac.
  • When it is completely up then replug the power cable and USB into the back of the unit.
  • Wait 5 seconds, then go to the Apple - About this Mac - More Info - Hardware - USB - Click on the arrow next to USB High Speed Bus - you should see the Bravo Drive listed as USB 2.0 ATAPI Bridge.
  • If the drive is shown and the printer driver is installed you should be able to start copying discs.

2. USB Cable. Try a new Cable.

3. USB Card Slot. Try the USB card in a different PCI slot.

4. Alternate Mac. Try the Bravo on a new Mac. You do not need to install any software. Just plug in the USB cable and after a few seconds you should be able to see the drive in System Profiler.

5. USB 2.0 Ports / Hubs. Try different ports on the USB 2.0 card using the proper plugin sequence above. Try another USB 2.0 cable. (Any USB cable is a USB 2.0 cable.) Unplug other USB devices. The PCI slot that the card is plugged into may not be able to handle multiple simultaneous USB connections. Do not plug the Bravo II into a hub or a pass through port on an external drive.

6 USB 2.0 Make sure you have a USB 2.0 port on your Mac. The Bravo II requires a high speed USB 2.0 port to properly function. A USB 2.0 port looks exactly the same as a regular USB port so there is no way to tell what you have by looking at the port. Running the Bravo II on a USB 1.1 connection (regular USB) will make it burn more slowly and may cause other issues. You will be limited to about 4x burning CDs and about 1x burning DVDs.

Generally speaking most G5 Macs have USB 2.0 ports. G4 Macs, eMacs, iMacs, iBooks and other Macs generally do not have USB 2.0 ports. You will need to purchase a USB 2.0 PCI card. To see if you have a USB 2.0 port go to your system profiler. You should see a USB Highspeed Bus - The speed should be up to 480 Mb per second. ("USB 2.0 ATAPI Bridge" is not a USB port! - This is the Mac reading your Bravo as USB 2.0 device. - See the screen capture below.)

Related Articles

Drive Recognition Bravo Mac

Drive Recognition Bravo PC

Drive Recognition BravoPro or II Mac

Drive Recognition BravoPro or II PC

Drive Recognition Composer Pro/XL/Max (Firewire)


related articles

Article Details
Views: 1824 Created on: May 24, 2014
Date updated: May 17, 2016

Poor Outstanding