> Knowledge base> Article: How do I perform the Robotics Self Test for my Bravo series duplicator?

How do I perform the Robotics Self Test for my Bravo series duplicator?

Article ID: 44707 Print
Question
How do I perform the Robotics Self Test for my Bravo series duplicator?

Answer

 

How do I perform the Robotics Self Test for my Bravo series duplicator?

 

To ensure that everything is working properly, a Self-Test feature is built into your Bravo.  In this mode, the Robotic Disc Transporter will go through the motions of picking and placing a disc to ensure proper working order.  This test may be performed without connecting the Publisher to the PC or Mac, so you may unplug the USB cable before performing the test.

 

Perform the test by doing the following steps based on what unit you have:

 

BravoPro/BravoProXi Series/Bravo4100 Series

Note: Will not work on Print-Only models.

 

1.  Load some discs into the Input Bin.

2.  Open the top recorder tray by pressing the eject button on the recorder.

3.  Make sure the Publisher's front cover is closed.

4.  With the Publisher turned on, press the Cartridge Button.

5.  While holding the Cartridge Button, press the Power Button until the robotics start to move.

6.  Release both buttons.  The test will start.

7.  To stop the test, wait until the disc has moved to the Output Bin and press the Power Button.

 

 

BravoSE

 

1.  Load some discs into the Input Bin.

2.  Open the cover.

3.  Press and hold the power button for five seconds.  The test will start.

4.  To stop the test, close the cover and press the power button.

 

 

BravoXRP

 

1.  Load some discs into the Input Bin.

2.  Open the top recorder tray by pressing the eject button on the recorder.

3.  The cover must be closed for this operation to complete.  However, in order to access the buttons you must open the cover.  To get around this problem simulate closing the cover by activating the cover lock sensor.  You may do this by putting an object such as a folded piece of paper in the slot where the lock would normally be located.

4.  With the Publisher turned on, press the Cartridge Button.

5.  While holding the Cartridge Button, press the Power Button until the robotics start to move.

6.  Release both buttons.  The test will start.

7.  To stop the test, wait until the disc has moved to the Output Bin and press the Power Button.

 

 

BravoXR/BravoXRn

 

1.  Load some discs into the Input Bin.

2.  The cover must be closed for this operation to complete.  However, in order to access the buttons you must open the cover.  To get around this problem simulate closing the cover by activating the cover lock sensor.  You may do this by putting an object such as a folded piece of paper in the slot where the lock would normally be located.

3.  With the Publisher turned on, press the Cartridge Button.

4.  While holding the Cartridge Button, press the Power Button until the robotics start to move.

5.  Release both buttons.  The test will start.

6.  To stop the test, wait until the disc has moved to the Output Bin and press the Power Button.

 

 

Bravo/BravoII

 

1.  Load some discs into the Input Bin.

2.  Make sure the Publisher's front cover is closed.

3.  With the Publisher turned on, press the Cartridge Button.

4.  While holding the Cartridge Button, press the Power Button until the robotics start to move.

5.  Release both buttons.  The test will start.

6.  To stop the test, wait until the disc has moved to the Output Bin and press the Power Button.

 


related articles

Article Details
Views: 7386 Created on: May 24, 2014
Date updated: Jan 27, 2016

Poor Outstanding