> Knowledge base> Article: The printer skips one page between every print. (CX1000)

The printer skips one page between every print. (CX1000)

Article ID: 44675 Email Print
Question
The printer skips one page between every print. (CX1000)

Answer

 

The printer skips one page between every print. (CX1000)

The CX1000 is printing the image too long.  It stops printing too late for it to see the next black mark so it has to skip one.
 
1. Try a stretch calibration.  See this article.

2. The Black Mark Repeat Length could be set wrong.  Check the stock sticker that came with your label stock for the correct setting or measure the distance from the end of one black mark to the beginning of the next.
 
3. The Vertical Die spacing could be wrong.  Check the stock sticker that came with your label stock for the correct setting or measure the distance from the end of one cut to the beginning of the next (with the web).

 
 


related articles

Article Details
Views: 2773 Created on: May 24, 2014
Date updated: Feb 25, 2016

Poor Outstanding