> Knowledge base> Article: Nothing happens on the FX1200 after I press Run Job (FX1200).

Nothing happens on the FX1200 after I press Run Job (FX1200).

Article ID: 44647 Email Print
Question
Nothing happens on the FX1200 after I press Run Job (FX1200).

Answer

 

Nothing happens on the FX1200 after I press Run Job (FX1200).

1. Moved Cut File. This is indication that the cut file has moved locations since the time when the cut file was first loaded into PTfinish.  This is typically caused by the removal of the USB thumb drive from the touch screen computer after the cut file was loaded into PTfinish.

2. Open Cover.  Close the cutter cover.


related articles

Article Details
Views: 1625 Created on: May 24, 2014
Date updated: May 11, 2016

Poor Outstanding