LX900 PTStatus Errors: Missing Cartridge, Invalid Cartridge, Offline, Not connected, Missing Printhead.
Could not find Color Label 900 - This error appears when launching PTStatus from the Start menu. This error appears if the printer driver is either not installed or has been renamed.
Color Label 900 is not connected - This error occurs when launching PTStatus from the Start menu. This error typically occurs if the USB cable is not connected but the printer driver is installed.
Offline Error - This error appears in the upper left corner of the status monitor and occurs if there is a communication problem while the status monitor is already open. If the USB is connected, this error could indicate some other communication problem with the LX900, the USB cable or the port on the computer.
Missing Cartridges - This error can occur if there is no printhead installed, if no cartridges are installed, if the printhead and cartridges are installed but the copper contacts for the printhead are dirty, or if the printhead is defective. Note: Reinstalling the driver will NOT resolve this issue.
Invalid Cartridge Error (5) - If PTStatus reports that the cartridges are invalid with a number (5) error, this indicates a physical obstruction to printhead movement. The maintenance station is out of place, the RFID sensor is bent, or a piece inside the printer has fallen loose and is in the way. Note: Reinstalling the driver will NOT resolve this issue.
Invalid Cartridge Error (3) - If PTStatus reports that the cartridges are invalid with a number (3) error, this indicates incorrect cartridges are installed, such as Bravo 4100 cartridges or other cartridges of similar shape and size, or the RFID data chip on the cartridge is defective. Note: Reinstalling the driver will NOT resolve this issue.
Invalid Cartridge Error (8) - This cartridge is defective or refilled. If the cartridge is not refilled and this error occurs on multiple cartridges, the printer may need repair. Please contact tech support.
All Cartridges are at zero percent ink remaining - A job is probably stuck in the print queue. Go to Printer and Faxes or Devices and Printers. Double click on the Color Label 900. Right click on any job in the queue and choose "Cancel Document."